Update: I found the problem with the “buggy” network driver. It was actually the RAM which is behaving unstable. The RAM is Kingston HyperX Impact 8GB 2933MHz DDR4 CL17 – avoid it for the Odroid H2+. So both drivers should…
Blog Archives
Operational Amplifiers (op amps)
Well, internet is full of op amp tutorials. Wasting time for writing yet another tutorial which will say nothing new is not efficient. What I’ll do is to search for good tutorials and list them. I’ll also read/watch them and…
Posted in Beginners
Voltage, current, resistance, Ohm’s law.
You have never studied electronics it’s probably a good idea to learn about basic quantities voltage, current and resistace before you continue with electronics. If you know about it it’s still good to read this in order to confirm you…
Posted in Beginners
First Steps with μControllers Part 3
(running the first program) When you write programs for devices it’s a lot worse when something goes wrong. For example if you output the wrong signal, depending on your schematic you might be making a short circuit. Or if you…
First Steps with μControllers Part 2
(writing the first program) If you are tired of talking and want some action – let’s not waste anymore time. In this part you will learn how to set up a project using MPLab, write a simple program and run…
First Steps with μControllers Part 1
… or starting from scratch. You heard about microcontrollers, but you don’t know where to start. Well start here – read this article/tutorial and you will never look at microcontrollers in the same way again.
Introduction to Microcontrollers
In this article I will try to describe microcontrolers and their function. I’ll give a brief description of the parts of the microcontroller.
